This update for wpa_supplicant fixes the following issues :

  - CVE-2015-4141: WPS UPnP vulnerability with HTTP chunked     transfer encoding. (bnc#930077)

  - CVE-2015-4142: Integer underflow in AP mode WMM Action     frame processing. (bnc#930078)

  - CVE-2015-4143: EAP-pwd missing payload length     validation. (bnc#930079) 

  - CVE-2015-5310: Ignore Key Data in WNM Sleep Mode     Response frame if no PMF in use. (bsc#952254)

  - CVE-2015-8041: Fix payload length validation in NDEF     record parser. (bsc#937419)

This update was imported from the SUSE:SLE-12:Update update project.

This update for wpa_supplicant fixes the following issues :

Security issue fixed :

CVE-2019-16275: Fixed an AP mode PMF disconnection protection bypass (bsc#1150934).

Non-security issues fixed :

Enable SAE support (jsc#SLE-14992).

Limit P2P_DEVICE name to appropriate ifname size.

Fix wicked wlan (bsc#1156920)

Restore fi.epitest.hostap.WPASupplicant.service (bsc#1167331)

With v2.9 fi.epitest.hostap.WPASupplicant.service is obsolete (bsc#1167331)

Fix WLAN config on boot with wicked. (bsc#1166933)

Update to 2.9 release :

  - SAE changes

  - disable use of groups using Brainpool curves

  - improved protection against side channel attacks

[https://w1.fi/security/2019-6/]

  - EAP-pwd changes

  - disable use of groups using Brainpool curves

  - allow the set of groups to be configured     (eap_pwd_groups)

  - improved protection against side channel attacks

[https://w1.fi/security/2019-6/]

  - fixed FT-EAP initial mobility domain association using     PMKSA caching (disabled by default for backwards     compatibility; can be enabled with     ft_eap_pmksa_caching=1)

  - fixed a regression in OpenSSL 1.1+ engine loading

  - added validation of RSNE in (Re)Association Response     frames

  - fixed DPP bootstrapping URI parser of channel list

  - extended EAP-SIM/AKA fast re-authentication to allow use     with FILS

  - extended ca_cert_blob to support PEM format

  - improved robustness of P2P Action frame scheduling

  - added support for EAP-SIM/AKA using anonymous@realm     identity

  - fixed Hotspot 2.0 credential selection based on roaming     consortium to ignore credentials without a specific EAP     method

  - added experimental support for EAP-TEAP peer (RFC 7170)

  - added experimental support for EAP-TLS peer with TLS     v1.3

  - fixed a regression in WMM parameter configuration for a     TDLS peer

  - fixed a regression in operation with drivers that     offload 802.1X 4-way handshake

  - fixed an ECDH operation corner case with OpenSSL

  - SAE changes

  - added support for SAE Password Identifier

  - changed default configuration to enable only groups 19,     20, 21

(i.e., disable groups 25 and 26) and disable all unsuitable groups

completely based on REVmd changes

  - do not regenerate PWE unnecessarily when the AP uses the

anti-clogging token mechanisms

  - fixed some association cases where both SAE and FT-SAE     were enabled on both the station and the selected AP

  - started to prefer FT-SAE over SAE AKM if both are     enabled

  - started to prefer FT-SAE over FT-PSK if both are enabled

  - fixed FT-SAE when SAE PMKSA caching is used

  - reject use of unsuitable groups based on new     implementation

guidance in REVmd (allow only FFC groups with prime >= 3072 bits and ECC

groups with prime >= 256)

  - minimize timing and memory use differences in PWE     derivation

[https://w1.fi/security/2019-1/] (CVE-2019-9494, bsc#1131868)

  - EAP-pwd changes

  - minimize timing and memory use differences in PWE     derivation

[https://w1.fi/security/2019-2/] (CVE-2019-9495, bsc#1131870)

  - verify server scalar/element     [https://w1.fi/security/2019-4/]

(CVE-2019-9497, CVE-2019-9498, CVE-2019-9499, bsc#1131874, bsc#1131872,

bsc#1131871, bsc#1131644)

  - fix message reassembly issue with unexpected fragment

[https://w1.fi/security/2019-5/] (CVE-2019-11555, bsc#1133640)

  - enforce rand,mask generation rules more strictly

  - fix a memory leak in PWE derivation

  - disallow ECC groups with a prime under 256 bits (groups     25, 26, and

27)

  - SAE/EAP-pwd side-channel attack update

[https://w1.fi/security/2019-6/] (CVE-2019-13377, bsc#1144443)

  - fixed CONFIG_IEEE80211R=y (FT) build without     CONFIG_FILS=y

  - Hotspot 2.0 changes

  - do not indicate release number that is higher than the     one AP

supports

  - added support for release number 3

  - enable PMF automatically for network profiles created     from

credentials

  - fixed OWE network profile saving

  - fixed DPP network profile saving

  - added support for RSN operating channel validation     (CONFIG_OCV=y and network profile parameter ocv=1)

  - added Multi-AP backhaul STA support

  - fixed build with LibreSSL

  - number of MKA/MACsec fixes and extensions

  - extended domain_match and domain_suffix_match to allow     list of values

  - fixed dNSName matching in domain_match and     domain_suffix_match when using wolfSSL

  - started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192     AKM if both are enabled

  - extended nl80211 Connect and external authentication to     support SAE, FT-SAE, FT-EAP-SHA384

  - fixed KEK2 derivation for FILS+FT

  - extended client_cert file to allow loading of a chain of     PEM encoded certificates

  - extended beacon reporting functionality

  - extended D-Bus interface with number of new properties

  - fixed a regression in FT-over-DS with mac80211-based     drivers

  - OpenSSL: allow systemwide policies to be overridden

  - extended driver flags indication for separate 802.1X and     PSK 4-way handshake offload capability

  - added support for random P2P Device/Interface Address     use

  - extended PEAP to derive EMSK to enable use with ERP/FILS

  - extended WPS to allow SAE configuration to be added     automatically for PSK (wps_cred_add_sae=1)

  - removed support for the old D-Bus interface     (CONFIG_CTRL_IFACE_DBUS)

  - extended domain_match and domain_suffix_match to allow     list of values

  - added a RSN workaround for misbehaving PMF APs that     advertise IGTK/BIP KeyID using incorrect byte order

  - fixed PTK rekeying with FILS and FT

  - fixed WPA packet number reuse with replayed messages and     key reinstallation [https://w1.fi/security/2017-1/]     (CVE-2017-13077, CVE-2017-13078, CVE-2017-13079,     CVE-2017-13080, CVE-2017-13081, CVE-2017-13082,     CVE-2017-13086, CVE-2017-13087, CVE-2017-13088)

  - fixed unauthenticated EAPOL-Key decryption in     wpa_supplicant [https://w1.fi/security/2018-1/]     (CVE-2018-14526)

  - added support for FILS (IEEE 802.11ai) shared key     authentication

  - added support for OWE (Opportunistic Wireless     Encryption, RFC 8110; and transition mode defined by     WFA)

  - added support for DPP (Wi-Fi Device Provisioning     Protocol)

  - added support for RSA 3k key case with Suite B 192-bit     level

  - fixed Suite B PMKSA caching not to update PMKID during     each 4-way handshake

  - fixed EAP-pwd pre-processing with PasswordHashHash

  - added EAP-pwd client support for salted passwords

  - fixed a regression in TDLS prohibited bit validation

  - started to use estimated throughput to avoid undesired     signal strength based roaming decision

  - MACsec/MKA :

  - new macsec_linux driver interface support for the Linux     kernel

macsec module

  - number of fixes and extensions

  - added support for external persistent storage of PMKSA     cache (PMKSA_GET/PMKSA_ADD control interface commands;
    and MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case)

  - fixed mesh channel configuration pri/sec switch case

  - added support for beacon report

  - large number of other fixes, cleanup, and extensions

  - added support for randomizing local address for GAS     queries (gas_rand_mac_addr parameter)

  - fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel

  - added option for using random WPS UUID (auto_uuid=1)

  - added SHA256-hash support for OCSP certificate matching

  - fixed EAP-AKA' to add AT_KDF into     Synchronization-Failure

  - fixed a regression in RSN pre-authentication candidate     selection

  - added option to configure allowed group management     cipher suites (group_mgmt network profile parameter)

  - removed all PeerKey functionality

  - fixed nl80211 AP and mesh mode configuration regression     with Linux 4.15 and newer

  - added ap_isolate configuration option for AP mode

  - added support for nl80211 to offload 4-way handshake     into the driver

  - added support for using wolfSSL cryptographic library

  - SAE

  - added support for configuring SAE password separately of     the WPA2

PSK/passphrase

  - fixed PTK and EAPOL-Key integrity and key-wrap algorithm     selection

for SAE; note: this is not backwards compatible, i.e., both the AP and

station side implementations will need to be update at the same time to

maintain interoperability

  - added support for Password Identifier

  - fixed FT-SAE PMKID matching

  - Hotspot 2.0

  - added support for fetching of Operator Icon Metadata     ANQP-element

  - added support for Roaming Consortium Selection element

  - added support for Terms and Conditions

  - added support for OSEN connection in a shared RSN BSS

  - added support for fetching Venue URL information

  - added support for using OpenSSL 1.1.1

  - FT

  - disabled PMKSA caching with FT since it is not fully     functional

  - added support for SHA384 based AKM

  - added support for BIP ciphers BIP-CMAC-256,     BIP-GMAC-128,

BIP-GMAC-256 in addition to previously supported BIP-CMAC-128

  - fixed additional IE inclusion in Reassociation Request     frame when

using FT protocol

Changed service-files for start after network (systemd-networkd).

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for wpa_supplicant fixes the following issues :

Security issue fixed :

  - CVE-2019-16275: Fixed an AP mode PMF disconnection     protection bypass (bsc#1150934).

Non-security issues fixed :

  - Enable SAE support (jsc#SLE-14992).

  - Limit P2P_DEVICE name to appropriate ifname size.

  - Fix wicked wlan (bsc#1156920)

  - Restore fi.epitest.hostap.WPASupplicant.service     (bsc#1167331)

  - With v2.9 fi.epitest.hostap.WPASupplicant.service is     obsolete (bsc#1167331)

  - Fix WLAN config on boot with wicked. (bsc#1166933)

  - Update to 2.9 release :

  - SAE changes

  - disable use of groups using Brainpool curves

  - improved protection against side channel attacks     [https://w1.fi/security/2019-6/]

  - EAP-pwd changes

  - disable use of groups using Brainpool curves

  - allow the set of groups to be configured     (eap_pwd_groups)

  - improved protection against side channel attacks     [https://w1.fi/security/2019-6/]

  - fixed FT-EAP initial mobility domain association using     PMKSA caching (disabled by default for backwards     compatibility; can be enabled with     ft_eap_pmksa_caching=1)

  - fixed a regression in OpenSSL 1.1+ engine loading

  - added validation of RSNE in (Re)Association Response     frames

  - fixed DPP bootstrapping URI parser of channel list

  - extended EAP-SIM/AKA fast re-authentication to allow use     with FILS

  - extended ca_cert_blob to support PEM format

  - improved robustness of P2P Action frame scheduling

  - added support for EAP-SIM/AKA using anonymous@realm     identity

  - fixed Hotspot 2.0 credential selection based on roaming     consortium to ignore credentials without a specific EAP     method

  - added experimental support for EAP-TEAP peer (RFC 7170)

  - added experimental support for EAP-TLS peer with TLS     v1.3

  - fixed a regression in WMM parameter configuration for a     TDLS peer

  - fixed a regression in operation with drivers that     offload 802.1X 4-way handshake

  - fixed an ECDH operation corner case with OpenSSL

  - SAE changes

  - added support for SAE Password Identifier

  - changed default configuration to enable only groups 19,     20, 21 (i.e., disable groups 25 and 26) and disable all     unsuitable groups completely based on REVmd changes

  - do not regenerate PWE unnecessarily when the AP uses the     anti-clogging token mechanisms

  - fixed some association cases where both SAE and FT-SAE     were enabled on both the station and the selected AP

  - started to prefer FT-SAE over SAE AKM if both are     enabled

  - started to prefer FT-SAE over FT-PSK if both are enabled

  - fixed FT-SAE when SAE PMKSA caching is used

  - reject use of unsuitable groups based on new     implementation guidance in REVmd (allow only FFC groups     with prime >= 3072 bits and ECC groups with prime >=     256)

  - minimize timing and memory use differences in PWE     derivation [https://w1.fi/security/2019-1/]     (CVE-2019-9494, bsc#1131868)

  - EAP-pwd changes

  - minimize timing and memory use differences in PWE     derivation [https://w1.fi/security/2019-2/]     (CVE-2019-9495, bsc#1131870)

  - verify server scalar/element     [https://w1.fi/security/2019-4/] (CVE-2019-9497,     CVE-2019-9498, CVE-2019-9499, bsc#1131874, bsc#1131872,     bsc#1131871, bsc#1131644)

  - fix message reassembly issue with unexpected fragment     [https://w1.fi/security/2019-5/] (CVE-2019-11555,     bsc#1133640)

  - enforce rand,mask generation rules more strictly

  - fix a memory leak in PWE derivation

  - disallow ECC groups with a prime under 256 bits (groups     25, 26, and 27)

  - SAE/EAP-pwd side-channel attack update     [https://w1.fi/security/2019-6/] (CVE-2019-13377,     bsc#1144443)

  - fixed CONFIG_IEEE80211R=y (FT) build without     CONFIG_FILS=y

  - Hotspot 2.0 changes

  - do not indicate release number that is higher than the     one AP supports

  - added support for release number 3

  - enable PMF automatically for network profiles created     from credentials

  - fixed OWE network profile saving

  - fixed DPP network profile saving

  - added support for RSN operating channel validation     (CONFIG_OCV=y and network profile parameter ocv=1)

  - added Multi-AP backhaul STA support

  - fixed build with LibreSSL

  - number of MKA/MACsec fixes and extensions

  - extended domain_match and domain_suffix_match to allow     list of values

  - fixed dNSName matching in domain_match and     domain_suffix_match when using wolfSSL

  - started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192     AKM if both are enabled

  - extended nl80211 Connect and external authentication to     support SAE, FT-SAE, FT-EAP-SHA384

  - fixed KEK2 derivation for FILS+FT

  - extended client_cert file to allow loading of a chain of     PEM encoded certificates

  - extended beacon reporting functionality

  - extended D-Bus interface with number of new properties

  - fixed a regression in FT-over-DS with mac80211-based     drivers

  - OpenSSL: allow systemwide policies to be overridden

  - extended driver flags indication for separate 802.1X and     PSK 4-way handshake offload capability

  - added support for random P2P Device/Interface Address     use

  - extended PEAP to derive EMSK to enable use with ERP/FILS

  - extended WPS to allow SAE configuration to be added     automatically for PSK (wps_cred_add_sae=1)

  - removed support for the old D-Bus interface     (CONFIG_CTRL_IFACE_DBUS)

  - extended domain_match and domain_suffix_match to allow     list of values

  - added a RSN workaround for misbehaving PMF APs that     advertise IGTK/BIP KeyID using incorrect byte order

  - fixed PTK rekeying with FILS and FT

  - fixed WPA packet number reuse with replayed messages and     key reinstallation [https://w1.fi/security/2017-1/]     (CVE-2017-13077, CVE-2017-13078, CVE-2017-13079,     CVE-2017-13080, CVE-2017-13081, CVE-2017-13082,     CVE-2017-13086, CVE-2017-13087, CVE-2017-13088)

  - fixed unauthenticated EAPOL-Key decryption in     wpa_supplicant [https://w1.fi/security/2018-1/]     (CVE-2018-14526)

  - added support for FILS (IEEE 802.11ai) shared key     authentication

  - added support for OWE (Opportunistic Wireless     Encryption, RFC 8110; and transition mode defined by     WFA)

  - added support for DPP (Wi-Fi Device Provisioning     Protocol)

  - added support for RSA 3k key case with Suite B 192-bit     level

  - fixed Suite B PMKSA caching not to update PMKID during     each 4-way handshake

  - fixed EAP-pwd pre-processing with PasswordHashHash

  - added EAP-pwd client support for salted passwords

  - fixed a regression in TDLS prohibited bit validation

  - started to use estimated throughput to avoid undesired     signal strength based roaming decision

  - MACsec/MKA :

  - new macsec_linux driver interface support for the Linux     kernel macsec module

  - number of fixes and extensions

  - added support for external persistent storage of PMKSA     cache (PMKSA_GET/PMKSA_ADD control interface commands;
    and MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case)

  - fixed mesh channel configuration pri/sec switch case

  - added support for beacon report

  - large number of other fixes, cleanup, and extensions

  - added support for randomizing local address for GAS     queries (gas_rand_mac_addr parameter)

  - fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel

  - added option for using random WPS UUID (auto_uuid=1)

  - added SHA256-hash support for OCSP certificate matching

  - fixed EAP-AKA' to add AT_KDF into     Synchronization-Failure

  - fixed a regression in RSN pre-authentication candidate     selection

  - added option to configure allowed group management     cipher suites (group_mgmt network profile parameter)

  - removed all PeerKey functionality

  - fixed nl80211 AP and mesh mode configuration regression     with Linux 4.15 and newer

  - added ap_isolate configuration option for AP mode

  - added support for nl80211 to offload 4-way handshake     into the driver

  - added support for using wolfSSL cryptographic library

  - SAE

  - added support for configuring SAE password separately of     the WPA2 PSK/passphrase

  - fixed PTK and EAPOL-Key integrity and key-wrap algorithm     selection for SAE; note: this is not backwards     compatible, i.e., both the AP and station side     implementations will need to be update at the same time     to maintain interoperability

  - added support for Password Identifier

  - fixed FT-SAE PMKID matching

  - Hotspot 2.0

  - added support for fetching of Operator Icon Metadata     ANQP-element

  - added support for Roaming Consortium Selection element

  - added support for Terms and Conditions

  - added support for OSEN connection in a shared RSN BSS

  - added support for fetching Venue URL information

  - added support for using OpenSSL 1.1.1

  - FT

  - disabled PMKSA caching with FT since it is not fully     functional

  - added support for SHA384 based AKM

  - added support for BIP ciphers BIP-CMAC-256,     BIP-GMAC-128, BIP-GMAC-256 in addition to previously     supported BIP-CMAC-128

  - fixed additional IE inclusion in Reassociation Request     frame when using FT protocol

  - Changed service-files for start after network     (systemd-networkd).

This update was imported from the SUSE:SLE-15:Update update project.

This update for wpa_supplicant fixes the following issues :

wpa_supplicant was updated to 2.9 release :

  - SAE changes

  - disable use of groups using Brainpool curves

  - improved protection against side channel attacks     [https://w1.fi/security/2019-6/]

  - EAP-pwd changes

  - disable use of groups using Brainpool curves

  - allow the set of groups to be configured     (eap_pwd_groups)

  - improved protection against side channel attacks     [https://w1.fi/security/2019-6/]

  - fixed FT-EAP initial mobility domain association using     PMKSA caching (disabled by default for backwards     compatibility; can be enabled with     ft_eap_pmksa_caching=1)

  - fixed a regression in OpenSSL 1.1+ engine loading

  - added validation of RSNE in (Re)Association Response     frames

  - fixed DPP bootstrapping URI parser of channel list

  - extended EAP-SIM/AKA fast re-authentication to allow use     with FILS

  - extended ca_cert_blob to support PEM format

  - improved robustness of P2P Action frame scheduling

  - added support for EAP-SIM/AKA using anonymous@realm     identity

  - fixed Hotspot 2.0 credential selection based on roaming     consortium to ignore credentials without a specific EAP     method

  - added experimental support for EAP-TEAP peer (RFC 7170)

  - added experimental support for EAP-TLS peer with TLS     v1.3

  - fixed a regression in WMM parameter configuration for a     TDLS peer

  - fixed a regression in operation with drivers that     offload 802.1X 4-way handshake

  - fixed an ECDH operation corner case with OpenSSL

  - SAE changes

  - added support for SAE Password Identifier

  - changed default configuration to enable only groups 19,     20, 21 (i.e., disable groups 25 and 26) and disable all     unsuitable groups completely based on REVmd changes

  - do not regenerate PWE unnecessarily when the AP uses the     anti-clogging token mechanisms

  - fixed some association cases where both SAE and FT-SAE     were enabled on both the station and the selected AP

  - started to prefer FT-SAE over SAE AKM if both are     enabled

  - started to prefer FT-SAE over FT-PSK if both are enabled

  - fixed FT-SAE when SAE PMKSA caching is used

  - reject use of unsuitable groups based on new     implementation guidance in REVmd (allow only FFC groups     with prime >= 3072 bits and ECC groups with prime >=     256)

  - minimize timing and memory use differences in PWE     derivation [https://w1.fi/security/2019-1/]     (CVE-2019-9494, bsc#1131868)

  - EAP-pwd changes

  - minimize timing and memory use differences in PWE     derivation [https://w1.fi/security/2019-2/]     (CVE-2019-9495, bsc#1131870)

  - verify server scalar/element     [https://w1.fi/security/2019-4/] (CVE-2019-9497,     CVE-2019-9498, CVE-2019-9499, bsc#1131874, bsc#1131872,     bsc#1131871, bsc#1131644)

  - fix message reassembly issue with unexpected fragment     [https://w1.fi/security/2019-5/] (CVE-2019-11555,     bsc#1133640)

  - enforce rand,mask generation rules more strictly

  - fix a memory leak in PWE derivation

  - disallow ECC groups with a prime under 256 bits (groups     25, 26, and 27)

  - SAE/EAP-pwd side-channel attack update     [https://w1.fi/security/2019-6/] (CVE-2019-13377,     bsc#1144443)

  - fixed CONFIG_IEEE80211R=y (FT) build without     CONFIG_FILS=y

  - Hotspot 2.0 changes

  - do not indicate release number that is higher than the     one AP supports

  - added support for release number 3

  - enable PMF automatically for network profiles created     from credentials

  - fixed OWE network profile saving

  - fixed DPP network profile saving

  - added support for RSN operating channel validation     (CONFIG_OCV=y and network profile parameter ocv=1)

  - added Multi-AP backhaul STA support

  - fixed build with LibreSSL

  - number of MKA/MACsec fixes and extensions

  - extended domain_match and domain_suffix_match to allow     list of values

  - fixed dNSName matching in domain_match and     domain_suffix_match when using wolfSSL

  - started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192     AKM if both are enabled

  - extended nl80211 Connect and external authentication to     support SAE, FT-SAE, FT-EAP-SHA384

  - fixed KEK2 derivation for FILS+FT

  - extended client_cert file to allow loading of a chain of     PEM encoded certificates

  - extended beacon reporting functionality

  - extended D-Bus interface with number of new properties

  - fixed a regression in FT-over-DS with mac80211-based     drivers

  - OpenSSL: allow systemwide policies to be overridden

  - extended driver flags indication for separate 802.1X and     PSK 4-way handshake offload capability

  - added support for random P2P Device/Interface Address     use

  - extended PEAP to derive EMSK to enable use with ERP/FILS

  - extended WPS to allow SAE configuration to be added     automatically for PSK (wps_cred_add_sae=1)

  - removed support for the old D-Bus interface     (CONFIG_CTRL_IFACE_DBUS)

  - extended domain_match and domain_suffix_match to allow     list of values

  - added a RSN workaround for misbehaving PMF APs that     advertise IGTK/BIP KeyID using incorrect byte order

  - fixed PTK rekeying with FILS and FT

  - fixed WPA packet number reuse with replayed messages and     key reinstallation [https://w1.fi/security/2017-1/]     (CVE-2017-13077, CVE-2017-13078, CVE-2017-13079,     CVE-2017-13080, CVE-2017-13081, CVE-2017-13082,     CVE-2017-13086, CVE-2017-13087, CVE-2017-13088)

  - fixed unauthenticated EAPOL-Key decryption in     wpa_supplicant [https://w1.fi/security/2018-1/]     (CVE-2018-14526)

  - added support for FILS (IEEE 802.11ai) shared key     authentication

  - added support for OWE (Opportunistic Wireless     Encryption, RFC 8110; and transition mode defined by     WFA)

  - added support for DPP (Wi-Fi Device Provisioning     Protocol)

  - added support for RSA 3k key case with Suite B 192-bit     level

  - fixed Suite B PMKSA caching not to update PMKID during     each 4-way handshake

  - fixed EAP-pwd pre-processing with PasswordHashHash

  - added EAP-pwd client support for salted passwords

  - fixed a regression in TDLS prohibited bit validation

  - started to use estimated throughput to avoid undesired     signal strength based roaming decision

  - MACsec/MKA :

  - new macsec_linux driver interface support for the Linux     kernel macsec module

  - number of fixes and extensions

  - added support for external persistent storage of PMKSA     cache (PMKSA_GET/PMKSA_ADD control interface commands;
    and MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case)

  - fixed mesh channel configuration pri/sec switch case

  - added support for beacon report

  - large number of other fixes, cleanup, and extensions

  - added support for randomizing local address for GAS     queries (gas_rand_mac_addr parameter)

  - fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel

  - added option for using random WPS UUID (auto_uuid=1)

  - added SHA256-hash support for OCSP certificate matching

  - fixed EAP-AKA' to add AT_KDF into     Synchronization-Failure

  - fixed a regression in RSN pre-authentication candidate     selection

  - added option to configure allowed group management     cipher suites (group_mgmt network profile parameter)

  - removed all PeerKey functionality

  - fixed nl80211 AP and mesh mode configuration regression     with Linux 4.15 and newer

  - added ap_isolate configuration option for AP mode

  - added support for nl80211 to offload 4-way handshake     into the driver

  - added support for using wolfSSL cryptographic library

  - SAE

  - added support for configuring SAE password separately of     the WPA2 PSK/passphrase

  - fixed PTK and EAPOL-Key integrity and key-wrap algorithm     selection for SAE; note: this is not backwards     compatible, i.e., both the AP and station side     implementations will need to be update at the same time     to maintain interoperability

  - added support for Password Identifier

  - fixed FT-SAE PMKID matching

  - Hotspot 2.0

  - added support for fetching of Operator Icon Metadata     ANQP-element

  - added support for Roaming Consortium Selection element

  - added support for Terms and Conditions

  - added support for OSEN connection in a shared RSN BSS

  - added support for fetching Venue URL information

  - added support for using OpenSSL 1.1.1

  - FT

  - disabled PMKSA caching with FT since it is not fully     functional

  - added support for SHA384 based AKM

  - added support for BIP ciphers BIP-CMAC-256,     BIP-GMAC-128, BIP-GMAC-256 in addition to previously     supported BIP-CMAC-128

  - fixed additional IE inclusion in Reassociation Request     frame when using FT protocol

Limit P2P_DEVICE name to appropriate ifname size.

Enable SAE support(jsc#SLE-14992).

CVE-2019-16275: AP mode PMF disconnection protection bypass (bsc#1150934)

Fix wicked wlan (bsc#1156920)

Still include fi.epitest.hostap.WPASupplicant.service (bsc#1167331)

Change wpa_supplicant.service to ensure wpa_supplicant gets started before network. Fix WLAN config on boot with wicked. (bsc#1166933)

Adjust the service to start after network.target wrt bsc#1165266

Using O_WRONLY flag [http://w1.fi/security/2015-5/] (CVE-2015-8041)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Several vulnerabilities have been discovered in wpa_supplicant and hostapd. The Common Vulnerabilities and Exposures project identifies the following problems :

  - CVE-2015-4141     Kostya Kortchinsky of the Google Security Team     discovered a vulnerability in the WPS UPnP function with     HTTP chunked transfer encoding which may result in a     denial of service.

  - CVE-2015-4142     Kostya Kortchinsky of the Google Security Team     discovered a vulnerability in the WMM Action frame     processing which may result in a denial of service.

  - CVE-2015-4143 CVE-2015-4144 CVE-2015-4145 CVE-2015-4146     Kostya Kortchinsky of the Google Security Team     discovered that EAP-pwd payload is not properly     validated which may result in a denial of service.

  - CVE-2015-5310     Jouni Malinen discovered a flaw in the WMM Sleep Mode     Response frame processing. A remote attacker can take     advantage of this flaw to mount a denial of service.

  - CVE-2015-5314 CVE-2015-5315     Jouni Malinen discovered a flaw in the handling of     EAP-pwd messages which may result in a denial of     service.

  - CVE-2015-5316     Jouni Malinen discovered a flaw in the handling of     EAP-pwd Confirm messages which may result in a denial of     service.

  - CVE-2015-8041     Incomplete WPS and P2P NFC NDEF record payload length     validation may result in a denial of service.

Jouni Malinen reports :

Incomplete WPS and P2P NFC NDEF record payload length validation.
(2015-5)

This update for wpa_supplicant fixes the following issues :

  - CVE-2015-4141: WPS UPnP vulnerability with HTTP chunked     transfer encoding. (bnc#930077)

  - CVE-2015-4142: Integer underflow in AP mode WMM Action     frame processing. (bnc#930078)

  - CVE-2015-4143: EAP-pwd missing payload length     validation. (bnc#930079)

  - CVE-2015-5310: Ignore Key Data in WNM Sleep Mode     Response frame if no PMF in use. (bsc#952254)

  - CVE-2015-8041: Fix payload length validation in NDEF     record parser. (bsc#937419)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote SUSE Linux SLES12 / SLES_SAP12 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2022:1853-1 advisory.

  - Multiple integer overflows in the NDEF record parser in hostapd before 2.5 and wpa_supplicant before 2.5     allow remote attackers to cause a denial of service (process crash or infinite loop) via a large payload     length field value in an (1) WPS or (2) P2P NFC NDEF record, which triggers an out-of-bounds read.
    (CVE-2015-8041)

  - Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Pairwise Transient Key (PTK) Temporal     Key (TK) during the four-way handshake, allowing an attacker within radio range to replay, decrypt, or     spoof frames. (CVE-2017-13077)

  - Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the     four-way handshake, allowing an attacker within radio range to replay frames from access points to     clients. (CVE-2017-13078)

  - Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11w allows reinstallation of the Integrity     Group Temporal Key (IGTK) during the four-way handshake, allowing an attacker within radio range to spoof     frames from access points to clients. (CVE-2017-13079)

  - Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the     group key handshake, allowing an attacker within radio range to replay frames from access points to     clients. (CVE-2017-13080)

  - Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11w allows reinstallation of the Integrity     Group Temporal Key (IGTK) during the group key handshake, allowing an attacker within radio range to spoof     frames from access points to clients. (CVE-2017-13081)

  - Wi-Fi Protected Access (WPA and WPA2) that supports IEEE 802.11r allows reinstallation of the Pairwise     Transient Key (PTK) Temporal Key (TK) during the fast BSS transmission (FT) handshake, allowing an     attacker within radio range to replay, decrypt, or spoof frames. (CVE-2017-13082)

  - Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Tunneled Direct-Link Setup (TDLS) Peer     Key (TPK) during the TDLS handshake, allowing an attacker within radio range to replay, decrypt, or spoof     frames. (CVE-2017-13086)

  - Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Group Temporal Key     (GTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame, allowing an attacker     within radio range to replay frames from access points to clients. (CVE-2017-13087)

  - Wi-Fi Protected Access (WPA and WPA2) that support 802.11v allows reinstallation of the Integrity Group     Temporal Key (IGTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame,     allowing an attacker within radio range to replay frames from access points to clients. (CVE-2017-13088)

  - An issue was discovered in rsn_supp/wpa.c in wpa_supplicant 2.0 through 2.6. Under certain conditions, the     integrity of EAPOL-Key messages is not checked, leading to a decryption oracle. An attacker within range     of the Access Point and client can abuse the vulnerability to recover sensitive information.
    (CVE-2018-14526)

  - The EAP-pwd implementation in hostapd (EAP server) before 2.8 and wpa_supplicant (EAP peer) before 2.8     does not validate fragmentation reassembly state properly for a case where an unexpected fragment could be     received. This could result in process termination due to a NULL pointer dereference (denial of service).
    This affects eap_server/eap_server_pwd.c and eap_peer/eap_pwd.c. (CVE-2019-11555)

  - The implementations of SAE and EAP-pwd in hostapd and wpa_supplicant 2.x through 2.8 are vulnerable to     side-channel attacks as a result of observable timing differences and cache access patterns when Brainpool     curves are used. An attacker may be able to gain leaked information from a side-channel attack that can be     used for full password recovery. (CVE-2019-13377)

  - The implementations of SAE in hostapd and wpa_supplicant are vulnerable to side channel attacks as a     result of observable timing differences and cache access patterns. An attacker may be able to gain leaked     information from a side channel attack that can be used for full password recovery. Both hostapd with SAE     support and wpa_supplicant with SAE support prior to and including version 2.7 are affected.
    (CVE-2019-9494)

  - The implementations of EAP-PWD in hostapd and wpa_supplicant are vulnerable to side-channel attacks as a     result of cache access patterns. All versions of hostapd and wpa_supplicant with EAP-PWD support are     vulnerable. The ability to install and execute applications is necessary for a successful attack. Memory     access patterns are visible in a shared cache. Weak passwords may be cracked. Versions of     hostapd/wpa_supplicant 2.7 and newer, are not vulnerable to the timing attack described in CVE-2019-9494.
    Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including version     2.7 are affected. (CVE-2019-9495)

  - The implementations of EAP-PWD in hostapd EAP Server and wpa_supplicant EAP Peer do not validate the     scalar and element values in EAP-pwd-Commit. This vulnerability may allow an attacker to complete EAP-PWD     authentication without knowing the password. However, unless the crypto library does not implement     additional checks for the EC point, the attacker will not be able to derive the session key or complete     the key exchange. Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including     version 2.4 are affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior     to and including version 2.7 are affected. (CVE-2019-9497)

  - The implementations of EAP-PWD in hostapd EAP Server, when built against a crypto library missing explicit     validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit. An     attacker may be able to use invalid scalar/element values to complete authentication, gaining session key     and network access without needing or learning the password. Both hostapd with SAE support and     wpa_supplicant with SAE support prior to and including version 2.4 are affected. Both hostapd with EAP-pwd     support and wpa_supplicant with EAP-pwd support prior to and including version 2.7 are affected.
    (CVE-2019-9498)

  - The implementations of EAP-PWD in wpa_supplicant EAP Peer, when built against a crypto library missing     explicit validation on imported elements, do not validate the scalar and element values in EAP-pwd-Commit.
    An attacker may complete authentication, session key and control of the data connection with a client.
    Both hostapd with SAE support and wpa_supplicant with SAE support prior to and including version 2.4 are     affected. Both hostapd with EAP-pwd support and wpa_supplicant with EAP-pwd support prior to and including     version 2.7 are affected. (CVE-2019-9499)

  - The implementations of SAE in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to side     channel attacks as a result of cache access patterns. NOTE: this issue exists because of an incomplete fix     for CVE-2019-9494. (CVE-2022-23303)

  - The implementations of EAP-pwd in hostapd before 2.10 and wpa_supplicant before 2.10 are vulnerable to     side-channel attacks as a result of cache access patterns. NOTE: this issue exists because of an     incomplete fix for CVE-2019-9495. (CVE-2022-23304)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Published	Updated	Severity
93700	openSUSE Security Update : wpa_supplicant (openSUSE-2016-1104)	Nessus	SuSE Local Security Checks	9/26/2016	1/19/2021	medium
143627	SUSE SLED15 / SLES15 Security Update : wpa_supplicant (SUSE-SU-2020:3380-1) (KRACK)	Nessus	SuSE Local Security Checks	12/9/2020	2/6/2024	high
143321	openSUSE Security Update : wpa_supplicant (openSUSE-2020-2053) (KRACK)	Nessus	SuSE Local Security Checks	11/30/2020	2/7/2024	high
143704	SUSE SLES12 Security Update : wpa_supplicant (SUSE-SU-2020:3424-1) (KRACK)	Nessus	SuSE Local Security Checks	12/9/2020	2/6/2024	high
86833	Debian DSA-3397-1 : wpa - security update	Nessus	Debian Local Security Checks	11/11/2015	1/11/2021	medium
84653	FreeBSD : wpa_supplicant -- WPS_NFC option payload length validation vulnerability (c93c9395-25e1-11e5-a4a5-002590263bf5)	Nessus	FreeBSD Local Security Checks	7/13/2015	1/6/2021	medium
93507	SUSE SLED12 / SLES12 Security Update : wpa_supplicant (SUSE-SU-2016:2305-1)	Nessus	SuSE Local Security Checks	9/15/2016	1/6/2021	medium
143304	openSUSE Security Update : wpa_supplicant (openSUSE-2020-2059) (KRACK)	Nessus	SuSE Local Security Checks	11/30/2020	2/8/2024	high
161651	SUSE SLES12 Security Update : wpa_supplicant (SUSE-SU-2022:1853-1)	Nessus	SuSE Local Security Checks	5/28/2022	7/14/2023	critical

Detections

Analytics

Plugins Search

medium

high

high

high

medium

medium

medium

high

critical